24-Pack Bulk Recessed Lighting That Actually Delivers

Why bulk recessed lighting is a smart move

If you’re updating your home or taking on a renovation, getting your lighting right can make or break the entire vibe. Instead of grabbing fixtures one at a time, I decided to go with bulk recessed lighting—and it made everything faster, cheaper, and way more consistent.

I picked up this 24-pack of dimmable, canless LED ceiling lights and never looked back. You get everything in one box: ultra-thin design, easy installation, built-in junction boxes, and a ton of brightness packed into a clean, low-profile light. And when you’re doing multiple rooms, buying in bulk isn’t just practical—it saves a ton of time and money.

💡 Lighting your entire space shouldn’t require overthinking. This kit makes it simple.
👉 Tap here to grab the same recessed lighting set I used

Whether you’re a DIYer or working with a contractor, going bulk just makes sense.

Where I needed bulk lighting the most in my home

My project started in the basement. The old lighting was dim, yellow, and made the space feel dated. Once I installed a few of these wafer-style LED recessed lights, I immediately saw the difference. Everything felt brighter, more open, and way more modern.

From there, I went room by room: the hallway, kitchen, and even the guest bedroom. The best part? Since I bought a 24-pack, I didn’t have to stop and reorder or worry about mismatched models. Everything matched, and the install process was seamless.

If you’ve got multiple rooms that need an upgrade—or you’re just tired of inconsistent lighting setups—bulk recessed lighting is absolutely the way to go. One purchase. One look. And no running back and forth to the store.

What you get in this 24-pack recessed lighting kit

When I say this bulk recessed lighting pack has everything—I mean it. No guessing, no last-minute trips to the hardware store. You get 24 ultra-thin 6-inch LED lights, each one equipped with its own junction box, pre-attached wiring, and simple connectors that make installation super fast.

Here’s the breakdown of what you’ll find in the box:

1. 24 canless LED lights – Slim, lightweight, and ready to install
2. 24 junction boxes – FCC & ETL certified for safety
3. Dimmable 5CCT technology – Choose between 5 color temperatures with a switch
4. 1100 lumens per light – Plenty of brightness for most rooms
5. Install clips + connectors – No special tools needed

The lights feel well-built—not flimsy plastic like some budget brands. Once they’re in the ceiling, they sit flush and look super clean. Perfect for kitchens, basements, hallways, or any room where you want an updated, minimalist look.

👉 If you’re tired of overpriced fixtures that don’t include hardware, this all-in-one lighting kit is the smarter buy.
Check out the full 24-light recessed LED pack here and see what you’re actually getting for the price.

Canless = less mess (and why it matters)

I’ve installed traditional recessed lighting with cans before. It’s a pain—cutting the holes, fitting the cans, dealing with insulation clearances… it’s just not fun. That’s why going with canless recessed lighting was a game-changer for me.

These lights are wafer-thin, so they fit in tight spaces and low-clearance ceilings—especially in basements or under upstairs bathrooms where you’re dodging ductwork. No cans, no housing units—just pop in the junction box, cut a clean hole, and mount the light flush.

And because they’re dimmable and color adjustable, I didn’t have to commit to one fixed style. I could make my kitchen lighting cool and crisp, and my hallway lighting soft and warm—just by flipping a switch before installation.

This setup isn’t just easier… it’s way more flexible, and in the long run, it saves money and sanity. For any DIY remodel or full-room upgrade, bulk recessed lighting like this just makes everything smoother from start to finish.

How these compare to traditional recessed lighting kits

I’ve installed the old-school recessed kits before—you know, the ones that come with big metal cans, bulky trim, and enough wiring to make you question your life choices. Compared to those, this bulk recessed lighting kit feels like a breath of fresh air.

Here’s the honest comparison:

1. Size – These are ultra-thin and sit flush with the ceiling. Traditional lights stick out or require deep clearance.
2. Installation – With canless lights, there’s no need for separate housings. You cut your hole, wire into the junction box, and snap the light in place. Done.
3. Heat + Safety – LED wafer lights run much cooler and are safer around insulation than older incandescent setups.
4. Price per unit – I did the math. This 24-pack comes out to way less per light than buying individual can lights, trim kits, and bulbs.
5. Style – These give your ceilings a clean, modern look. No bulky trim or “builder-basic” feel.

If I had to do it all again (and I kind of already am), I’d skip the old recessed kits entirely and go straight for these. They’re better looking, easier to install, and you don’t have to sacrifice performance to simplify the process.

How bright are these LED ceiling lights, really?

I was honestly surprised at how much light these put out. Each one delivers 1100 lumens, which is more than enough for most standard-sized rooms. I installed six of them in my basement living area, and it went from dim and dungeon-like to bright and inviting instantly.

Because they’re dimmable, I can adjust them based on mood or time of day. When I’m working, I keep them at full brightness. For movie nights? Drop them down and get that cozy theater vibe.

Plus, they’re 5CCT adjustable, so I was able to choose different color temperatures for each area of my home:

• Warm white in the hallway
• Neutral in the bedrooms
• Cool daylight in the kitchen

💡 Want lights that can adapt to every room and every vibe?
These are the bulk recessed lights I trusted to do the job—and they delivered in every way.

Are these good for remodels or new builds?

Absolutely—and that’s one of the biggest perks of this bulk recessed lighting kit. I used it during a home remodel, but if I were starting from scratch, I’d still choose this same setup.

For remodels, these are perfect because:

• They’re canless, so you don’t need tons of ceiling depth or access
• The included junction boxes make wiring easy, even in tight spaces
• You can install around joists, ducts, and whatever else is hiding in your ceiling

For new builds, you get even more freedom. You can plan the layout, wire it all together, and knock out the install in one go. Plus, with 24 lights in one pack, you’re not stuck piecing together your lighting plan room by room.

If you’re looking to outfit a full home, rental, or flip, this kit checks every box—and then some. 💡
You can see why I went this route in my full write-up on this exact lighting deal.

The installation was easier than I expected

I’m handy—but I’m not an electrician. That’s why I was a little nervous going into the install. But this bulk recessed lighting kit was one of the smoothest electrical projects I’ve done.

Here’s what made it easy:

1. The junction boxes are pre-wired with push connectors. No twisting wires or guessing.
2. The lights snap into place with spring clips. No special tools or extra brackets needed.
3. The cutting template included in the box made measuring fast and foolproof.

I finished installing six lights in my basement in just over an hour—and that included cleanup. No crawling around in insulation, no messing with big metal cans, and no returns for missing parts.

If you’re even slightly comfortable with DIY projects, this is a job you can handle. And once you get the hang of the first one, the rest fly by.

👉 Looking to install new lighting without the headache? This is the kit that made me feel like a pro—even when I wasn’t.

What makes this a great deal for bulk recessed lighting

I’ve seen recessed lighting sets priced all over the place—some with fancy brand names, some with low-quality builds and inflated prices. But this 24-pack? It hits that sweet spot of affordable and actually reliable.

Let’s break it down:

• 1100 lumens per light = super bright
• Dimmable + color adjustable = works in any space
• 24 lights in one box = less than $X per fixture
• Junction boxes and wiring included = no extra purchases
• Canless, low-profile install = saves time and ceiling space

When you factor in the convenience and performance, this set is hard to beat. I didn’t need to buy anything extra—no separate trims, housings, or weird connectors. Just open the box and go.

➡️ If you’re outfitting an entire home or want consistent lighting in multiple rooms, this is the kind of bulk recessed lighting you’ll be glad you grabbed upfront.

So…Should you go bulk for your ceiling lighting?

If you’ve got more than one room to light—or you’re just tired of mixing and matching fixtures—bulk recessed lightingis the smartest choice I’ve made in my home upgrades. It saved me time, money, and the frustration of constantly reordering.

These canless LED lights checked every box: clean design, easy install, customizable color, and serious brightness. Whether you’re remodeling one space or lighting an entire build, this is the kind of upgrade that gives real results without the stress.

Want more hand-picked deals that actually deliver? Check out the latest lighting steals and trending upgrades on our homepage—I only post the ones I’d buy myself.

At the end of the day, if you’re hunting for high-quality bulk recessed lighting that won’t wreck your budget, this kit is the one I keep coming back to.